Bar bending machines | Choosing the Right Bending Machine
A bending machine is used to bend tubes, bars, and profiles to produce angles, T-profiles, U-profiles, and so on. Typically, this machine is used in metalworking.The rollers are the most important part of the machine. They apply a combination of forces to the profile in order to obtain a deformation perpendicular to its length.
Read more
{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{#each product.featureValues}} {{content}} {{/each}}
{{/if}}{{#if product.productPrice }} {{#if product.productPrice.price }}
{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{/if}} {{/if}}
{{#if product.activeRequestButton}}
{{/if}}
{{product.productLabel}}
{{product.model}}
{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
Compare this product Remove from comparison tool
{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{#each product.featureValues}} {{content}} {{/each}}
{{/if}}{{#if product.productPrice }} {{#if product.productPrice.price }}
{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{/if}} {{/if}}
{{#if product.activeRequestButton}}
{{/if}}
{{product.productLabel}}
{{product.model}}
{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
Compare this product Remove from comparison tool
{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
hydraulic bending machine120 HE manual for flat profiles for aluminum profiles
hydraulic bending machine
120 HE
Bending capacity: 12 mm - 130 mm
Bending force: 12 kN - 120 kN
Total height: 130 mm
The Stierli-Bieger 120 HE is a very compact bending machine made from solid steel. The bending pin with a diameter of 60 mm is inserted 110 mm into the plate. An extremely wide range ...
Compare this product Remove from comparison tool
See the other products
Stierli-Bieger AG
hydraulic bending machine
220 HE
Bending capacity: 16 µm - 130,000 µm
Bending force: 22 kN - 220 kN
Total height: 130 mm
... control is available for all horizontal bending and straightening machines. It has proved itself over decades of use and is easy to use for any member of staff. The fine stroke adjustment allows precise ...
Compare this product Remove from comparison tool
See the other products
Stierli-Bieger AG
hydraulic bending machine
220 CNC-W
Bending capacity: 130, 16 mm
Bending force: 22 kN - 220 kN
Total height: 130 mm
... can be programmed.The material-related spring back is calculated from bending tables which are saved in the control system and can be adapted or extended as required. In addition, the length before ...
Compare this product Remove from comparison tool
See the other products
Stierli-Bieger AG
electric bending machinePEL-200 steel tube aluminum bar sheet metal
electric bending machine
PEL-200
★Description Channel Letter Bending Machine (also called CNC letter bending machine or character bending machine) is a new advertising ...
Compare this product Remove from comparison tool
electric bending machine
PEL-300
★Description Channel Letter Bending Machine (also called CNC letter bending machine or character bending machine) is a new advertising ...
Compare this product Remove from comparison tool
hydraulic bending machineFB profile bar horizontal
hydraulic bending machine
FB
... designs and constructs a special bending machine, widely used in the naval sector as specific benders for bulbs and profiles normally used for the construction of the boat skeleton. Faccin’s ...
Compare this product Remove from comparison tool
electric bending machineBM150 foot-operated tube profile
electric bending machine
BM150
Bending capacity: 141, 168 mm
Bending radius: 850 mm
Overall length: 1,000 mm
... markets.DescrizioneThe BM150 pipe bender is the only non-mandrel pipe bender that allows for both left and right bending with particular tools we manufacture.Another feature that ...
Compare this product Remove from comparison tool
See the other products
MACKMA
hydraulic bending machine
RB50 I
The Mackma RB50i ring roller machine is a small-sized professional hydraulic machine. It has three motorized rollers and a 16 ton central roller thrust. The digital display is simple and easy to use, ...
Compare this product Remove from comparison tool
See the other products
MACKMA
hydraulic bending machine
RB60 E
The Mackma RB60e Ring Roller machine is a small professional machine, fully electric and hydraulic. It has three motorized rollers and a 10 ton central roller thrust. The digital display is simple and ...
Compare this product Remove from comparison tool
See the other products
MACKMA
fully-electric bending machineHG-SSP 135/3200 tube profile sheet metal
fully-electric bending machine
HG-SSP 135/3200
Bending length: 2,500 mm - 3,200 mm
Weight: 10 t
Total power: 5 kW - 13.2 kW
... 4. Electrical industry: bending machines are used for bending conduit pipes and metal wires to create various shapes and sizes required for electrical installations.5. Glass industry: ...
Compare this product Remove from comparison tool
rolling bending machine hydraulic electric for flat profiles
rolling bending machine
... the sheets duringbending and rolling. Table hold-metal sheetwith brushes, steel pliers covered by spécialmaterials scratch-resistant to avoid that themétal sheet gets ruined.Hydraulic system with blank-holder ...
Compare this product Remove from comparison tool
electric bending machineFPX profile busbar aluminum bar
electric bending machine
FPX
Strip3D bending from coilCNC operations : cutting, marking and notchingMulti-function bending toolPossible to make bends with short straight distance, double ...
Compare this product Remove from comparison tool
electric bending machine
Robomac e-Motion
Bending capacity: 2 mm - 10 mm
• From .08 to .375” / 2 to 10 mm• Wire and Strip• 3D bending from coil• Full electric bending arm• Compact, modular, sturdy, cost-efficient• 1 to 3 bending heads machine• ...
Compare this product Remove from comparison tool
manual benderFJB 1 for flat profiles bar universal
manual bender
FJB 1
Bending capacity: 100, 16, 60 mm
Bending angle: 120 °
Overall length: 390 mm
Scantool FJB 1 Universal bar Bender with matrices.Product SpecificationsLength (mm)390Height (mm)280Net weight (kg)30
Compare this product Remove from comparison tool
electric bending machine
SCANTOOL PB 50-3HM
Bending capacity: 50 mm
Roller diameter: 155, 160 mm
Overall length: 1,200 mm
... is included for bending profiles and flat bars. However, we can also deliver roller sets for bending tubes and pipes as an option with this bending machine. ...
Compare this product Remove from comparison tool
concrete reinforcement bending machineTYR-HD25 electric horizontal fully-automatic
concrete reinforcement bending machine
TYR-HD25
Bending capacity: 1 in
Bending radius: 6 in - 1,000 in
Overall length: 24 in
A well-priced machine for bending rebar rings and spirals from an approx. min. dia. of 7" to an unlimited max. Ideal for work sites that need to bend rebar quickly on the job and precast.Features: ...
Compare this product Remove from comparison tool
electric bending machine
PF-T series
Bending capacity: 1 in - 1 in
PFT MACHINES - a convenient combination machine that both cuts and bends. Angles are set by placing up to nine pins around the turntable. These pins set the order of stops/angles on the control panel. ...
Compare this product Remove from comparison tool
electric bending machine
TYB series
... , 95, & 125 mm diameter (2.5", 3.75" & 5" approx)Split pin stirrup assembly with 2 bending radii.Bars are not dragged through machine, but heldfirmly during bending. ...
Compare this product Remove from comparison tool
busbar benderHGP 5010 electro-hydraulic
busbar bender
HGP 5010
Bending angle: 90 °
Bending force: 190 kN
Overall length: 700 mm
Bender for lateral bending Al and Cu busbars:• width range 20 ÷ 50 mm• thickness range 5 ÷ 10 mm• bending angle range up to 90°Special features:• equipped with bending ...
Compare this product Remove from comparison tool
busbar bender
HSk 5010
Bending angle: 90 °
Overall length: 720 mm
Total height: 190 mm
Bender for axial bending (propeller like) Al and Cu busbars:• width range 20 ÷ 50 mm• thickness range 3 ÷ 10 mm• bending angle range up to 90°Special features:• equipped with ...
Compare this product Remove from comparison tool
electro-hydraulic bender
HGD 125
Bending angle: 90 °
Bending force: 190 kN
Overall length: 370 mm
Bender-puncher for bending Al and Cu busbars as well as hole punching:• busbar width from 30 ÷ 125 mm• busbar thickness 5 ÷ 10 mm• round holes punching of 6,6 ÷ 21 mm• oval holes punching ...
Compare this product Remove from comparison tool
profile bending machineUPB Line hydraulic motorized tube
profile bending machine
UPB Line
Bending capacity: 30 mm - 360 mm
Total power: 3 kW - 22 kW
... mechanical lateral angle guide rolls• 3 Axis hydraulic lateral angle guide rolls (UPB 120-160)• Brake motor equipped for the precision bending (UPB 65-80)• Digital Read-Outs (2pcs)" ...
Compare this product Remove from comparison tool
electric bending machineP34 EVO concrete reinforcement automatic 3-phase
electric bending machine
P34 EVO
The P34 Evo bending bar is designed for bending iron bars up to a maximum of Ø 30 mm (1,18 inch). This machine is available with Single-phase or Three-phase ...
Compare this product Remove from comparison tool
See the other products
SIMPEDIL SRL
electric bending machine
P38 EVO
The P38 Evo bending bar is designed for bending iron bars up to a maximum of Ø 34 mm (1,34 inch). Features: • High functionality and efficient performance;• Design ...
Compare this product Remove from comparison tool
See the other products
SIMPEDIL SRL
electric bending machine
P44 EVO
The P44 Evo bending bar is designed for bending iron bars up to a maximum of Ø 38 mm (1,50"). Features: • High functionality and efficient performance;• Design ...
Compare this product Remove from comparison tool
See the other products
SIMPEDIL SRL
motorized bending machineMCB DS-36 concrete reinforcement for steel bar digital
motorized bending machine
MCB DS-36
Overall length: 87 cm
Overall width: 70 cm
Total height: 90 cm
Rebar bending machine is digitally controlled, and settings - programs are done on an LCD display. As the machine is digitally controlled, as well as it increases the use and work performance ...
Compare this product Remove from comparison tool
See the other products
Özaylar Machinery
motorized bending machine
MCB-BK36
Overall length: 87 cm
Overall width: 70 cm
Total height: 90 cm
... is automatically converted to Stirrup Bending Machine. While, with old style machines, stirrup and hook bending was very difficult and taking long time. MCB 36 can be ...
Compare this product Remove from comparison tool
See the other products
Özaylar Machinery
motorized bending machine
MCB-BK45
Overall length: 100 cm
Overall width: 70 cm
Total height: 90 cm
... is automatically converted to Stirrup Bending Machine. While, with old style machines, stirrup and hook bending was very difficult and taking long time. MCB 36 can be ...
Compare this product Remove from comparison tool
See the other products
Özaylar Machinery
electric bending machine for steel bar for wires CNC
electric bending machine
Bending capacity: 4 mm - 13 mm
Accuracy: 1 °
Overall width: 2,005 mm
Wire stirrup machine controlled by servo system, can automatically accomplish elastic,straighten,stirrup bending, cutting and so on.GTW4-12A wire stirrup machine is an full-automatic ...
Compare this product Remove from comparison tool
See the other products
Shandong Jiaxin Machinery Equipment Co., Ltd.
hydraulic bending machine
JIAXIN- HH4-12C
Bending capacity: 4 mm - 12 mm
Bending length: 1,300 mm
Accuracy: 1 °
... what is the application of the CNC stirrup wire bending machine?The Rebar bending machine is controlled by servo system, it can automatically accomplish elastic, ...
Compare this product Remove from comparison tool
See the other products
Shandong Jiaxin Machinery Equipment Co., Ltd.
electric bending machine
JIAXIN6-10-S
Bending capacity: 6 mm - 10 mm
Accuracy: 1 °
Overall width: 1,050 mm
wrought iron scroll bending machinePlace of Origin: Shandong, China (Mainland)Machine Type: coiling bending machine,roller-bending ...
Compare this product Remove from comparison tool
See the other products
Shandong Jiaxin Machinery Equipment Co., Ltd.
electric bending machineAL series tube for aluminum profiles bar
electric bending machine
AL series
Bending capacity: 38, 51 mm
Bending radius: 38 mm - 300 mm
Bending angle: 90 °
... CNC CONTROL AUTOMATIC(DOUBLE HEADS)Certification - CE/SGS/TUV/ISOPlace of Origin - ChinaApplication - Pipes or solid bars, various materials such as steel, stainless, aluminium and copperPackaging Details - Packed ...
Compare this product Remove from comparison tool
See the other products
Auto Link Technology Co Ltd
electric bending machine
AL series
Bending capacity: 19, 38, 51 mm
Bending radius: 0 mm - 250 mm
... CNC CONTROL AUTOMATIC (LEFT AND RIGHT)Certification - CE/SGS/TUV/ISOPlace of Origin - ChinaApplication - Pipes or solid bars,various materials as such steel, stainless, Aluminum and copperPacking Details - Packed ...
Compare this product Remove from comparison tool
See the other products
Auto Link Technology Co Ltd
hydraulic bending machine
AL series
Bending capacity: 18 mm - 168 mm
Bending radius: 80 mm - 500 mm
Total power: 3 kW - 22 kW
... AUTOMATIC (2 ELECTRIC AXIS +1 HYDRAULIC)Certification - CE/SGS/TUV/ISOPlace of Origin - ChinaApplication - Pipes or solid bars,various materials such as steel, stainless, aluminum and copperPackaging Details - ...
Compare this product Remove from comparison tool
See the other products
Auto Link Technology Co Ltd
busbar bending machineNC.40ZB series servo-electric horizontal vertical
$19,800 - $35,700
busbar bending machine
NC.40ZB series
Bending force: 400 kN
Overall width: 1,450 mm
Total height: 1,850 mm
NC.40ZB-1200 CNC busbar bending machine is one processing machine of high efficiency, high automation, high precision that can bend copper/aluminum busbar. The bus bar ...
Compare this product Remove from comparison tool
$6,000 - $13,000
hydraulic bending machine
Bending force: 600 kN
Overall width: 1,500 mm
Total height: 1,000 mm
... functions of bus bar (bus duct) double-end bending machine:The bus bar (bus duct )double-end bending machine is a new type of processing ...
Compare this product Remove from comparison tool
$25,000 - $47,000
hydraulic bending machine
Bending force: 200 kN
Overall width: 1,000 mm
Total height: 1,500 mm
... processing machine for bus ducts connecting bus bars: punching, stretching, bulging, and shearing of the connecting busbars.This CNC connecting bus duct processing machine is mainly ...
Compare this product Remove from comparison tool
electro-hydraulic bending machineMC150B tube profile bar
electro-hydraulic bending machine
MC150B
... and pipe bending machine MC150B NARGESA. Our pipe bender MC150B is designed to minimize the manufacturing cost and provide maximum performance when bending pipes and ...
Compare this product Remove from comparison tool
See the other products
Prada Nargesa SL
lever-operated bending machine61 series for steel bar rugged
lever-operated bending machine
61 series
... for simple operationalternatively to the left and right without returning the hand leverEquipped, as standard, with one bending rollerSuitable for use on building sites and in rebar processing plants
Compare this product Remove from comparison tool
hydraulic bending machineWC67K for aluminum profiles aluminum bar sheet metal
hydraulic bending machine
WC67K
Overall length: 170 cm
Overall width: 110 cm
Total height: 180 cm
... make the upper die mouth on the full length of the machine to obtain a specific curve, to compensate for the mechanical loading table and slide produced by the deflection, improve the workpiece bending ...
Compare this product Remove from comparison tool
electric bending machinePF 44 S concrete reinforcement automatic
electric bending machine
PF 44 S
Bending capacity: 10 mm - 36 mm
The Tecmor type S bending machines owe their name to the different design of the worktop, which allows the processing from four different positions, thanks to the two saddles that run along its entire ...
Compare this product Remove from comparison tool
See the other products
TECMOR S.R.L.
electric bending machinePK 20 tube bar 2 drive rollers
electric bending machine
PK 20
... designPipe bending capacity up to 25 mm diameterAngle iron bending capacity up to 20x20mmManual Hand Lever adjustment of Top Bending rollCombination horizontal-vertical working ...
Compare this product Remove from comparison tool
See the other products
Tugra Makina Metal
electro-hydraulic bending machinePKM 125 busbar
electro-hydraulic bending machine
PKM 125
Compare this product Remove from comparison tool
See the other products
SENA makine
electric bending machineB52 / B42 bar semi-automatic
electric bending machine
B52 / B42
JAYMAC® Bar Bending Machine is a semi automatic, durable fast and cost effective machine, used for bending reinforcement bars and various ...
Compare this product Remove from comparison tool
See the other products
Jaypee India Limited
hydraulic bending machine300-050 busbar
hydraulic bending machine
300-050
... free-standing machine for copper bars with dimensions of up to 150 mm x 10 mm. The maximum cross-section is 1,200 mm2. To operate hydraulically, it requires 700 bar (10,000 psi) at about ...
Compare this product Remove from comparison tool
See the other products
SML
electric bending machineP series concrete reinforcement 1-axis cold
electric bending machine
P series
... /84Machine for bending electrowelded mesh panels (maximum diameter of the wire 10 or 12 mm) and create polygonal cages in a few seconds. Mod. P12/96Adjustable arm version, which allows both bending ...
Compare this product Remove from comparison tool
See the other products
Oscam